Easson ES-1M, Operation Manual

Page: 92 / 114

Simplified R function Simplified R function
enter Maximum Cut
( )
MAX CUT
MAX CUT
= 0.3mm
enter Z step increment
( )
Z STEP
Z
Z STEP = 0.3 mm
Axis increment per
step machining is fixed
step 5 :
enter Z increment per step machining
ES-1 provides two options on the Z increment per step machining. Operator can make their selection on the
smooth R function.
Option 1 : Fixed Z step ( )
Under this option, the Z increment per step machining is fixed, since the ARc's curvature varies with
the Z position, the operator has to use their experience to select different Z STEP increment during
the ARC machining to get the optimal, fast machining
Z STEP
Option 2 : Maximum Cut ( )
Under this option, ES-1 will calculate the best possible Z increment per step machining according to
the curvature of ARC, to make the interpolated point approximately equal to the MAX CUT entered.
MAX CUT
ES-1 will calculate the best
Z step increment so that the
Max. distance between each
machining point approximately
the same.
All simplified R funtion to enter into ARC machining mode
machining parameters
have already entered
into ES-1
- 88 -
simulate Z axis move one step down
simulate Z axis move one step up
before the start of ARC machining, please make sure the tool is posited at the ARC starting point
and Z axis dial is set to zero ( 0.000 )
|The two Axis does not have a Z Axis,
so the uses the
ES-1
ES-1
and to simulate the Z axis movement
Easson
Z STEP
0.000
Z STEP
0.300
MAX CUT
0.000
MAX CUT
0.300