Page 3
Door Closer – Model DCF2003 Rev.1
Copyright © 2008 Eurospec
Failure to install this product as per these instructions &
dimensions shown on template will negate guarantee
Installation – Fig 66 Application – Angle of opening 180
°
Illustrations show clockwise closing door
1. Ensure that the door & surrounding frame are in
good condition & the door closes freely.
2. Select the correct hand of Fig 66 easi-fit template
and stick body of template to top corner of door. Fold
and stick top of template to underside of frame.
(
See Figs. 1 & 2
)
3. Drill pilot holes in door and frame according to
template & securely fix door closer body and Fig 66
bracket with screws supplied. Ensure adjusting screws
face away from hinge side of door. (
See Figs. 2 & 3).
4. Carefully detach link arm from adjuster arm &
securely fix adjuster arm shoe to fig.66 bracket ensuring
the shoe is rotated in the correct position as
shown on the template. (
See Fig. 4)
5. Place link arm onto closer spindle parallel
to door, fit securing screw, move link arm and
re-connect to adjuster arm. (
See Figs. 4 & 5
)
Note:
Adjust arm length as required: Loosen
nut, adjust arm & re-tighten nut.
6. Fit spindle cover cap to underside of closer. (
See Fig. 5
)
7. Check for correct closing & latching speeds and
adjust if necessary. (
See Fig.6
)
Fig 66 – Parallel Arm Application (Door closer fitted on push face of door)
Fig. 4
Fig. 6
Fig. 5
Fig. 1
Para
llel A
rm A
pplic
ation
Fig. 3
Adjust if required
Fig. 2
No.1 Closing Speed
No.2 Latching Speed
No.2
No.1
SLOW
FAST
CLOCKWISE CLOSING
ANTI-CLOCKWISE CLOSING
