Page 2
Door Closer – Model DCF2003 Rev.1
Copyright © 2008 Eurospec
Failure to install this product as per these instructions &
dimensions shown on template will negate guarantee
Installation – Fig 1 Application – Angle of opening 180
°
Illustrations show anti-clockwise closing door
1. Ensure that the door & surrounding frame are in
good condition & the door closes freely.
2. Select the correct hand of Fig. 1 easi-fit template
and with the door in the closed position, stick
template to top corner of door and frame. (
See
Figs. 1 & 2
)
3. Drill pilot holes in door and frame according to
easi-fit template & securely fix door closer
body with screws supplied. Ensure adjusting
screws face hinge side of door. (
See Figs. 2 & 3
)
4. Carefully detach link arm from adjuster arm &
securely fix adjuster arm shoe to frame ensuring
the shoe is rotated in the correct position as
shown on the template. (
See Fig. 4)
5. Place link arm onto closer spindle at right angles
to door, fit securing screw, move link arm and
re-connect to adjuster arm. (
See Figs. 4 & 5
)
Note:
To adjust arm to suit depth of frame, loosen
nut, adjust arm & re-tighten nut.
6. Fit spindle cover cap to underside of closer. (
See Fig. 5
)
7. Check for correct closing & latching speeds and
adjust if necessary. (
See Fig.6
)
Stan
dard
App
licat
ion
Fig 1 – Standard Application (Door closer fitted on pull face of door)
FAST
SLOW
No.1 Closing Speed
No.2 Latching Speed
No.2
No.1
Fig. 2
Fig. 3
Fig. 4
Adjust if
required
90
Fig. 6
Fig. 5
ADJUSTING SCREW
Fig. 1
