20
VII. Maintenance of the seat part
9. Replacement of the remote controller holder
①
Pull out the remote controller from the holder.
②
Remove the screw bolt tightening the holder.
③
Take away the holder from the support.
④
Install a new holder on the support.
⑤
Tighten the holder with the screw bolt.
10. Replacement of the remote controller
①
Remove the screws (9pcs) on the back cover of the controller
②
Disconnect the wire terminal of controller PCB; Then remove the screws(2pcs) on the PCB
.
③
Then you can replace any parts of the controller including PCB, Front cover and Back cover.
11. Replacement of the remote controller wire
④
Along the controller wire and remove the screws(6pcs) fixing the “R” nip
and disconnect wire terminal of controller.
⑤
Replace the new wire and fix it on the board, then connect
the terminal of controller.
.
12. Replacement of the front panel of seat part
①
Turn on the power and raise the foot rest to the highest position.
②
Operate the Zero-G 2 function to raise the seat-rest,
③
Remove the screws(12pcs) securing the front panel.
④
Then the front panel can be removed, replace it with a new one, and tighten it with screws.
Raise the foot rest to the
highest position
Screw bolt
“R” nip
Screw bolt
Screws(12pcs) securing the front panel
Summary of Contents for EC-380B
Page 3: ...3 I Specifications...
Page 31: ......
Page 34: ...3 5V 1 GND 2 PTE6 I O 3 PTE5 I O 4 PTE4 I O 5 PTE3 I O J26 6 5V TJC3S 6A...
