7
Fix the backplate to a wall or structure with
sufficient load-bearing capacity using the 4 wall
screws provided in the mounting kit. Use suitable
wall plugs for mounting and observe the local
regulations for recommended installation height.
CAUTION
The installation wall must cover the entire back of
the product. If this is not possible to achieve, it is
possible to use the Easee Mount.
NOTE
If you are going to install multiple backplates, now would
be a good time to mount them as well.
1
Backplate
Mounting
2
Backplate
Preparing
3
1
2
3
3
3
Suggested installation height
for accessibility
80–95 cm
1
1
1
1
1
x 4
1
x 1
2
x 2
3
x 3
Shorten the sealing plug to fit the cable. The hole
should be slightly smaller than the cable to ensure
a good seal.
Insert the cable through one of the 4 cable entries
and secure it to the backplate with the strain relief
provided.
Close all cable entries that are not in use with the
supplied blind plugs.
1
2
3
