8
WARNING
Turn off the power before you begin the
installation. Use extreme caution and follow
instructions carefully.
Installation
instructions
1.
Bend down the lower part of the rubber cover and
insert the two ends of the supplied tool into the two
openings at the bottom of the front cover.
2.
Pull the tool until the front cover comes loose and
remove the cover.
3.
Grasp the Type 2 socket and push upwards with
good force until the Chargeberry disconnects.
1
1
1
2
1
3
Opening
Charging Robot
We recommend that you watch the installation
videos available on our website:
easee.support
.