Easee Chargeberry, User Manual

Page: 5 / 32

5
• Pin code must be stored and will be used by electricians. The pin code can
be found on the front of the chargeberry and should be glued to the back
of this manual after use.
• The product should only be installed, repaired or maintained by authorized
electricians and in accordance with NEK400.
• All applicable local, regional and national regulations must be respected
when you install, repair or maintain this device.
• Do not use a damaged product.
• Do not use an extension cord with the charging cable.
• Do not touch the Type 2 connectors or put foreign bodies into them.
• If the charging robot lights up red an error has occurred - read more under
troubleshooting.
• The charging robot must be installed on a permanent location. The
electronics and backplate are not designed to be able to be connected in
and out an unlimited number of times.
Safety Instructions
Read these instructions thoroughly and get to know the product
before installing it.