Easee Chargeberry, User Manual

Page: 20 / 32

20
To be able to control your charging robot, you must use a smartphone and
connect it to the charger’s Wi-Fi network. The name of the Wi-Fi network
begins with ”Easee ...” and is activated by holding the touch button until the
light strip turns green and you hear a confirmation tone.
After connecting, open the browser and type ” 192.168.4.1 ” into the URL.
Then your 4-digit PIN code must be entered.
You can find the PIN code on the front of the chargeberry or on
the back of this booklet.
(If the electrician has glued it in)
Wifi interface