EAS Electric EMIH290FL, Instruction Manual

Page: 34 / 105

2.3 Working Theory
Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by
electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the
glass surface. The glass becomes hot only because the pan eventually warms it up.
2.4 Before using your New Induction Hob
• Read this guide, taking special note of the ‘Safety Warnings’ section.
•
Remove any protective film that may still be on your Induction hob.
2.5 Technical Specification
Cooking Hob
EMIH290F L
Cooking Zones
3 Zones
Supply Voltage 220-240V~ 50Hz or 60Hz
Installed Electric Power
7400W
Product Size L×W×H(mm) 590X520X6
2
Building-in Dimensions A×B (mm) 560X490
Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.
3. Operation of Product
3.1 Touch Controls
•
The controls respond to touch, so you do
n’t need to apply any pressure.
•
Use the ball of your finger, not its tip.
•
You will hear a beep each time a touch is registered.
•
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth)
covering them. Even a thin film of water may make the controls difficult to operate.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
8
V.1