6. COMMUNICATION
6.1 System monitoring via Datalogger - Wi-Fi /GPRS (Optional)
6.1.1 Wi-Fi /GPRS Datalogger Installation
Unpack the Datalogger from package.
1.
Unscrew the cap in COM1 port.
2.
Plug the Datalogger in and tighten.
For user guidance and configuration of
Datalogger, please refer to the corresponding Wi-
Fi Stick Guide manual, which is available in printed
form inside Documents pack, or an online manual
on our website at www.easelectric.es.
6.1.2 Smart Meter/
RS485
Connection
When installing Meter, All operation MUST NOT proceed until
AC and DC power is securely disconnected and discharged to prevent
electric shocks.
6.2 Output Power Control via Smart Meter
The inverter can control active power output via connecting smart meter,
following is the system connection mode.
Smart meter as above SDM230-Modbus connecting method and
setting baud rate method for Modbus please refer to its user manual.
15
14
V.
2
V.
2
