•
Insert
the
bolt
into
the
trimmer
head
and
connection
tube
and
secure
with
nut
.
(Fig 3)
•
Insert
the
bolt into the upper handle and connection tube and
secure with nut. (Fig 2)
ASSEMBLY
PACKING LIST
•
String
Trimmer
•
Connection
Tube
•
Safety
Guard
•
Owner
’
s Manual
•
Hardware
Bag
•
Cable Sleeve
UNPACKING
This product requires some assembly.
Carefully remove the product and accessories from the box. Make
sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage
occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call customer service
at 1
-
800
-
633
-
1501 for assistance.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental starting and
possible serious personal injury.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this warning
could result in serious personal injury.
WARNING:
Do not operate the trimmer without the guard attached.
ASSEMBLING
THE
CONNECTION
TUBE
•
Attach
the
bottom and top sections of string trimmer to the
connection tube.
(Fig 1)
4
Model ST00010
ATTACHING SAFETY
GUARD (See Fig 5)
Assemble
the
guard
as
shown. Insert
the
tabs
of
the
guard
into
the
slots
located
at
the
rear
of
the
motor
housing
.
With
a
Phillips
screw
driver
,
secure
the
two
(
2
)
screws
into
the
guard
and
motor
housing
.
Remove
protective
tape
from
blade
on
the
guard
.
Fig 2
Fig 1
Fig 3
•
Ensure
the
electrical
cable
is
inserted into the groove of the
connection tube and install the cable sleeve. (Fig
4
)
Fig 4
Fig 5
