Assembly and Operation Instructions
EarthWay 2600A-Plus_12-3
PAGE 2
ASSEMBLY INSTRUCTIONS
1.
Remove and identify all loose parts from carton
2.
Position hopper as shown to the right. Install frame using (4) #10 x 1 ¼” Flat Head Phillips screws.
TIGHTEN
THESE NOW
3.
Install gear box by inserting the pinion shaft into hole in center of hoppers
bottom. The
ARROW
on the gearbox must point to
FRONT
of the hopper.
Follow label instructions on hopper.
4.
Install lower handles onto Frame and secure with ¼-
20 x 2¼” bolt through
hole in Frame Braces and through the hole in frame
Warning
Remove agitator when using Rock Salt to prevent gearbox
damage
Next, SLIDE THE AXLE (COAST WHEEL SIDE FIRST)
through the right
side lower handle and into the gearbox (with the arrow facing the
FRONT
), you will need to rotate the axle to engage with the gearbox,
then through the left side lower handle.
