background image

Assembly and Operation Instructions 

 

EarthWay 14050 

 50

’ Hose Reel

 

PAGE 5 

MAINTENANCE

 

While your product has been made with high quality materials, degradation can occur over time. Inspect the hose and 
housing periodically. If cracking or blisters are visible, discontinue use. 

 

 

 PRODUCT CONTAINS CHARGED SPRING. DO NOT DISASSEMBLE HOUSING 

 

1.

 

Always keep the hose clean. 

2.

 

If the hose becomes dirty, clean it with a damp cloth while retracting. 

3.

 

DO NOT twist the hose while in use. 

4.

 

Mount the hose reel in a sheltered area to assist and protect the performance of the hose and the reel. 

5.

 

DO NOT allow the hose to contact any corrosive chemicals or fluids.  

6.

 

Always retract the hose when not in use.     

7.

 

DO NOT drink from hose.  Bacteria forms in stationary water (water standing in a hose). 

 

CUSTOMER SUPPORT

 

[email protected]

 | 1009 Maple Street, Bristol, IN 46507

 

ONE YEAR WARRANTY

 

EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for a period of one year to the end user with 
the original purchase receipt. If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion will repair or replace the 
part(s)/product at no charge provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal wear and tear 
as determined by EarthWay. 

EarthWay at its discretion may require that the part(s) or product be returned along with the original purchase receipt for examination and 
compliance with the terms of this warranty. Do not return any product without first receiving authorization from EarthWay Products, Inc.  

To seek remedy under this warranty, contact EarthWay Products, Inc. at  [email protected] or write to EarthWay Products, Inc. 1009 
Maple Street, Bristol, IN 46507 and describe the nature of the manufacturing defect. SPECIFIC LIMITATIONS: This warranty cove rs only the 
part(s) or product; any labor charges associated with repair or replacement of non-conformances are specifically excluded. Due to the 
corrosive nature of most fertilizers and ice melt products, EarthWay Products, Inc. makes no warranty against and specificall y excludes 
part(s) or product degradation or failure due to corrosion or its effects. 

Summary of Contents for 14050






Reviews: