Receiver/
Processor
̶
+
̶
+
NOTE:
Make sure the front
toggle switch is set to
LOWPASS.
Then, set the
CROSSOVER to 70Hz (9
o’clock position).
MQB1 Tactile Transducers
Receiver/
Processor
̶
+
Connecting to Tactile Transducers
To Power the MQB1 Tactile Transducers - Mono Wiring
Connecting to Tactile Transducers
To Power the MQB1 Tactile Transducers - Stereo Wiring
NOTE:
Make sure the front toggle
switch is set to LOWPASS.
Then, set the CROSSOVER to
70Hz (9 o’clock position).
MQB1 Tactile Transducer
To Power the Q10B Tactile Transducer - Mono Wiring
NOTE:
Make sure the front toggle
switch is set to LOWPASS.
Then, set the CROSSOVER
between 50Hz - 100Hz.
Q10B
Tactile Transducer
̶
+
Receiver/
Processor
+
̶
Connecting to a Subwoofer/Tactile Transducer
To Power the THOR In-Wall Subwoofer - Mono Wiring
NOTE:
Make sure the front toggle
switch is set to LOWPASS.
Then, set the CROSSOVER
between 50Hz - 100Hz.
THOR IW-SUB10 In-
Wall Subwoofer
Receiver/
Processor
12
Earthquake Sound Corp. | www.earthquakesound.com
XJ-300ST Manual 13
Specifications are subject to change without notice
XJ-300ST Manual
FUSE RATING: T5.0AL/250V
FUSE RATING: T5.0AL/250V
FUSE RATING: T5.0AL/250V
FUSE RATING: T5.0AL/250V
