3
Linking 2 XJ-300S Ts
Mounting 2 XJ-300S Ts
2
1
1
The XJ-300ST’s ingenious design lets the user link two ampli
fi
ers together
depending on the desired channel setup.
Wall (or anywhere) mountable
To wall mount two linked XJ-300ST ampli
fi
ers, install two short mounting ears to
the each outer sides of the linked ampli
fi
ers as shown below.
Be sure to bracket the backplates of the amps together for added reinforcement.
Be sure to bracket the backplates of the amps together for added reinforcement.
DO NOT APPLY ANY PRESSURE TO THE FRONT OR
BACKPLATES OF THE AMPLIFIERS AS DOING SO WILL
CAUSE DAMAGE TO THE KNOBS, TOGGLE SWITCHES
AND/OR TERMINALS. AMPLIFIERS DAMAGED IN THIS
MANNER ARE NOT COVERED BY WARRANTY.
1) Line up the linking bolts on one ampli
fi
er with the linking holes of the other
ampli
fi
er and push them towards each other.
2) Once the linking bolts are in the linking holes, push the ampli
fi
er with the linking
bolts towards the faceplate while pushing the other ampli
fi
er towards the
backplate to lock the two ampli
fi
ers together. The ampli
fi
ers are linked correctly
when their faceplates are
fl
ush.
3) Install the linking bracket to the backplates of the linked ampli
fi
ers for added
reinforcement (as shown below).
10
Earthquake Sound Corp. | www.earthquakesound.com
XJ-300ST Manual
11
Specifications are subject to change without notice
XJ-300ST Manual
Rack mountable
To rack mount two linked XJ-300ST ampli
fi
ers, install one short rack mounting
ear to each side of the ampli
fi
er as shown below.
X J -300 S T
X J -300 S T
FUSE RATING: T5.0AL/250V
