background image

Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com

16   MiniMe FF8

V2 

Manual

5 Year Limited Warranty Information

Earthquake warrants the original purchaser that all Factory Sealed New Audio Products to be free from defects in 
material and workmanship under normal and proper use for a period of five (5) years from the date of purchase (as 
shown on the original sales receipt with serial number affixed/written on it). 

The five (5) year limited warranty period is valid only if an authorized Earthquake dealer properly installs the product 
and  the  warranty  registration  card  is  properly  filled  out  and  sent  to  Earthquake  Sound  Corporation.  If  a  non-
authorized party installs the product, a ninety (90) day warranty period will be applied.

(A) Five (5) years limited warranty plan coverage guidelines:

l

First year: 

Earthquake pays for labor, parts, and ground freight (only in US mainland, not including Alaska and 

Hawaii. Shipping to us is not covered).

l

Second, third, fourth & fifth year: 

Earthquake pays labor only. Customer must pay for parts and freight both 

ways.

(B) Warning:

(C ) Earthquake will repair or replace   at our option   all defective products/parts subject to the following 
provisions:

l

l

l

l

l

(D) Warranty Limitations:

Warranty does not cover products that have been modified or abused, including but not limited to the following:

l

Damages  to  speaker  cabinet  and  cabinet  finish  due  to  misuse,  abuse  or  improper  use  of  cleaning 
materials/methods.

l

Bent speaker frame, broken speaker connectors, hole(s) in speaker cone, hole(s) in surround &/ dust cap, and 
burnt speaker voice coil.

l

Fading and/or deterioration of speaker components & finish due to improper exposure to elements.

l

Bent amplifier casing, damaged finish on the casing due to abuse, misuse or improper use of cleaning material.

l

Burnt tracers on PCB.

l

Product/part damaged due to poor packaging or abusive shipping conditions.

l

Subsequent damage to other products.

A warranty claim will not be valid if the warranty registration card is not properly filled & returned to Earthquake with a 
copy of the sales receipt. 

(E) Service Request:

To receive product service, contact Earthquake Service Department at (510) 732-1000 and request an RMA 
number (Return Material Authorization). Items shipped without a valid RMA number will be refused. Make sure 
you provide us with your complete/correct shipping address, a valid phone number, and a brief description of the 
problem you are experiencing with the product. In most cases, our technicians might be able to resolve the 
problem over the phone, thus eliminating the need to ship the product.

l

Products (sent in for repair) that are tested by Earthquake technicians and deemed to have no problem will not 
be covered by the limited warranty. Customer will be charged a minimum of one (1) hour of labor (at ongoing 
rate) plus shipping charges back to customer.

l

Each product sent in for repair must be packaged in its original packaging. Otherwise,

 repackaging charges 

will apply in addition to the labor, parts and shipping charges.

Defective  products/parts  have  not  been  altered  or  repaired  by  anyone  other  than  an  Earthquake  factory 
approved technician.
Products/parts are not subjected to negligence, misuse, accident or damage by improper line voltage. 
Products/parts were used with incompatible products.
The serial number or any part of the product has been altered, defaced or removed.
Products/parts have been used in any way that is contrary to Earthquake’s written instructions.

Summary of Contents for MINIME P8V2





















Reviews: