MiniMe DSP P63 Manual 9
AMPLIFIER PLATE OVERVIEW
(8) Low Level RCA Input
Use this input to deliver an audio signal
from your A/V source to the MiniMe
DSP P63 amplifier.
(9) 115V/230V AV Selector
The MiniMe DSP P63 can operate in a
110-120V or 220-240V environment.
The subwoofer should be set to the cor-
rect voltage depending on your region.
It is advised that you check the setting
prior to connecting the subwoofer to
any power source before use.
(11) Power Switch
Used to turn the MiniMe DSP P63 am-
plifier power on or off. Set this switch to
the ON position in order to use the
AUTO ON function as described in sec-
tion (2).
(12) Main Power/IEC (2P)
Power Cord Input
This AC line connector is used to power
the subwoofer. Make sure that the
power switch in in the OFF position
prior to connecting the subwoofer to
any power sources.
100-120V~60Hz
220-240V~50Hz
10
11
8
9
