MiniMe DSP P63 Manual 7
WHAT MAKES A MiniMe DSP P63
High Efficiency Class “D” Amplifier
The MiniMe DSP P63 amplifier utilizes an
advanced class “D” circuitry with over 90%
efficiency, allowing it to perform continu-
ously without getting hot. A 600 watts peak
power amplifier is fully equipped with auto
room tuning adjustments, 0–180º phase
switch, low level RCA inputs, auto signal
sensing, and an app controlled DSP module.
Premium Active Long Throw Driver
The active driver installed in every MiniMe
DSP P63 is specifically designed for accurate
reproduction of bass and sub-bass frequen-
cies. Built with TCT (Turbine Cooled Trans-
ducer) technology, stitched tensile leads,
anti-wobble cone construction, and rein-
forced dust cap, the MiniMe DSP P63 driver
effortlessly produces phenomenal bass with
extremely low distortion while staying cool.
Dual Passive Bass Radiators
The MiniMe DSP P63 is equipped with two
passive bass radiators. One is placed on each
side of the active driver. This increases the
efficiency of the subwoofer and capability of
ultra-low frequency reproduction. Coupled
with the active driver, the passive radiators
allow the MiniMe DSP P63 to deliver louder
and more powerful bass response without
using more power from the amplifier.
Luxurious Piano Gloss Finish
The deep luxurious finish of the MiniMe DSP
P63 begins with a thorough sanding and
priming, followed by multiple applications of
black or white piano lacquer with additional
fine sanding between each layer and fin-
ished with a smooth, high gloss clear coat.
Because the MiniMe DSP P63 has no visible
grilles, the active and passive driver dust
caps are finished with the same materials as
the enclosure leaving it with a beautifully
stunning and modern exterior that will com-
plement any living space décor.
Active Driver
Passive Driver
Passive Driver
