background image

Mounting & Speaker Placement Considerations

www.earthquakesound.com

3

Figure 2

In-Wall Speakers

THOR

IW-SUB10

Q10B

Tactile Transducer

IW-SUB10

EWS530C

EWS800

EWS800

EWS800

EWS800

Thank  you  for  purchasing  the  EWS  Edgeless  In-Wall  Speaker  series,  one  of 
Earthquake's  most  valued  in-wall  speaker  lines.  With  the  proper  installation  and 
operation, the EWS will provide a lifetime of durability and high-end performance.

It is very important to follow all installation/mounting instructions and recommendations 
in  this  manual  closely  and  carefully  to  insure  optimal  performance  operation  and 
longevity. 

The EWS Features:

- Frameless design for reduced visibility
- Long excursion kevlar speaker and woofer cones
- 1” (25mm) silk dome NEO swiveling tweeters
- ± 3dB bass and treble controls
- Elaborate crossover networks
- Easy Turn-N-Lock™ installation mechanism
- Gold plated, spring loaded terminals
- Magnetically attached, paintable grilles

Painting Guidelines: 

The EWS Edgeless In-Wall Speaker grilles are paintable and can accept virtually any 
type  of  paint.  Spray  and  roller  paint  applications  typically  provide  the  best  results. 
When you are ready to begin painting, remember to shield the driver and tweeter from 
the paint. Also, be sure to remove the inner grille cloth prior to painting and replace it 
once the paint has completely dried. 

Speaker Placement: 

The EWS Edgeless In-Wall Speakers are designed to be flush mounted in the walls or 
ceilings. To optimize their acoustics you should follow these simple guidelines:

For best stereo reproduction the speakers should be placed an equal distance from 
your listening position and separated so that the angle between them is between forty 
(40) and sixty (60) degrees. The units should be placed with the tweeters near the ear 
level of the seated listener. 

Dear Valued Customer,

Specifications are subject to change without notice

2

WARNING: These products are 
capable  of  generating  high 
sound  pressure  levels.  You 
should  exercise  caution  when 
operating these speakers. Long 
term exposures to high levels of 

sound pressure will cause permanent damage 
to  your  hearing.  Sound  pressure  levels 
exceeding  85dB  can  be  dangerous  with 
constant exposure, set your audio system to a 
comfortable  loudness  level.  Earthquake 
Sound Corporation does not assume liability   
for  damages  resulting  from  the  direct  use  of 
Earthquake speakers , and urges users to play 
volume at moderate levels.

®

BASS

0

+3

TREBLE

-3

0

+3

-3

®

BASS

0

+3

TREBLE

-3

0

+3

-3

Figure 1

40 - 60°

Summary of Contents for EWS530C

Page 1: ...ht Earthquake Sound Corporation Earthquake Sound Corporation 2727 McCone Avenue Hayward CA 94545 Phone 510 732 1000 Fax 510 732 1095 EWS Sound That Will Move You Sound That Will Move You Edgeless High Fidelity In Wall Speaker Series Installation Manual www sound com earthquake EWS800 EWS600 EWS530C ...

Page 2: ...to begin painting remember to shield the driver and tweeter from the paint Also be sure to remove the inner grille cloth prior to painting and replace it once the paint has completely dried Speaker Placement The EWS Edgeless In Wall Speakers are designed to be flush mounted in the walls or ceilings To optimize their acoustics you should follow these simple guidelines For best stereo reproduction t...

Page 3: ... position and tighten the screws evenly to secure the unit 4 PLACE THE GRILLE Align the grille speaker cover in position Gently snap grille into place 5 Easy Installation Steps 13 3 4 349mm x 9 3 4 248mm 12 7 8 326mm x 8 7 8 224mm 3 3 16 85mm E W S 5 3 0 C S P E C I F I C AT I O N S Frequency Response Sensitivity Nominal Impedance Power Handling Enclosure Material Type Driver Components 40Hz 20kHz...

Page 4: ... 1 silk dome swiveling NEO tweeter Wire Gauge Recommended 12 Weight Per Speaker 3 5 lbs 3 9 16 90mm 7 7 16 188mm x 10 7 8 275mm 11 15 16 303mm x 8 9 16 217mm E W S 8 0 0 S P E C I F I C AT I O N S Frequency Response Sensitivity Nominal Impedance Power Handling Enclosure Material Type Driver Components 30Hz 20kHz 88dB 1W 1M 8 Ohm 500 Watts Max Impact resist ABS plastic Two way system using one 8 lo...

Reviews: