9
ARDISAM
800-45-6007
www.ARDISAM.com
UNPACKING AND ASSEMBLY
Your.rototiller.comes.fully.assembled.except.for.a.few.
parts..The.following.instructions.will.help.you.unpack.
your.tiller.and.assemble.and.adjust.your.tiller’s.depth.
regulator.lever,.cable.tension.and.handlebar.height..You.
will.need.2-.9/16”.wrenches.
UNPACK TILLER
1..Open.top.of.carton.and.remove.handlebar.assembly.
2..Find.parts.packet..Parts.packet.contains:
. 4-./8-16.x./4”.hex.head.bolts.
. 4-./8-16.locknuts
. 1-.5/16-18.x./4”.hex.head.bolt
. 1-.detent.pin
. 1-.five.star.knob
..Cut.open.end.of.carton.and.remove.machine.by:
. a..Removing.lockpins.on.wheels.
. b..Roll.tiller.from.carton.
The right and left sides of your
rototiller are determined from
the operating position as you
face the direction of forward
travel.
ATTACH HANDLEBAR TO TILLER
1..Place.handlebar.stems.on.outside.of.lower.handle.
. bar.mount.and.align.lower.holes.
2..Insert.one./8-16.x./4”.bolt.for.each.side.in.lower..
. holes.at.the.desired.handlebar.height.
..Start./8-16.nuts.on.each.bolt.
4..Insert.one./8-16.x./4”.bolt.for.each.side.in.upper..
. holes.
5..Tighten.all./8-16.nuts.
Do not try to lift the rototiller from the carton.
IMPORTANT
CAUTION
!
height
adjustment
holes
lower handlebar
mount
3/8-16
nuts
3/8-16 x 3/4”
bolts
handlebar
stem
Summary of Contents for 7055
Page 2: ......
