15
ARDISAM
800-45-6007
www.ARDISAM.com
OPERATION
SHUTTING DOWN
TILLING
1..Adjust.the.depth.regulator.lever.to.desired.tilling..
. depth.
NOTE: Raise depth regulator lever up one hole
at a time, testing tiller operation after each raise.
Raising depth regulator lever too high can result in
loss of control of tiller!
2..Move.the.throttle.control.to.
fast
.
..Place.the.tiller.in.
forward
.by.pushing.down.on.the..
. drive.safety.control.lever.labeled.“FORWARD”--this..
. will.engage.the.wheels.and.tines.
NOTE: You can slow the tiller’s forward advance
at any time by putting slight downward pressure
on the handlebars, or you can stop the tiller by
releasing the drive safety control levers to the
neutral position.
To stop wheels and tines at any time, release drive
safety control levers to neutral position.
Always release drive safety control levers to
neutral position before adjusting the depth of the
regulator lever.
Practice operating the controls and tiller with
tines out of ground before beginning to till.
It is important that you know how to use the
tiller properly, how to keep control at all times,
how to stop the tines and wheels from turning,
and how to stop the engine if necessary. If you
do not know how to do these things, read the
Controls, Adjustments and Safety sections before
proceeding.
Temperature of muffler and near by areas may
exceed 150
°
F. Avoid these areas.
Do not move choke control to CHOKE to stop
engine. Backfire or engine damage may occur.
IMPORTANT
To stop the engine at any time, move throttle
control to the off position. To stop wheels and
tines at any time, release drive safety control
levers to neutral position.
WARNING
!
Engine and surrounding parts become extremely
hot during normal use, and will cause serious
burn injuries if touched before the engine has
cooled.
Allow engine to cool completely before
touching these hot surfaces.
DANGER
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
Summary of Contents for 7055
Page 2: ......
