EarthLCD ezLED-3 Series, User Manual

Page: 23 / 83

THEME 5 126 118 3 3 3 35 35 35 35 2
Don’t worry about damaging the default settings - these are the default values for theme 5. You can
change the settings and see the results by using the
BUTTON command as outlined in Section 12.0 .
The command THEME 5 references theme 5.
The [EmbossDkColor] and [EmbossLtColor] values, 126 and 118 , designate the colors that act as
the highlight on the upper left edge and the shadow on the lower right edge of each button, respectively.
These look best when the highlight is a few shades lighter than the main button color and the shadow is
a few shades darker.
The [TextColor0], [TextColor1] and [TextColorDisabled] values,
3
,
3
and
3
, designate the color of
the text when the button is at rest, being touched or is disabled. They’re set by default to be the same
colors, but can be changed to give a visual indication of the button’s state.
The [ Color0], [Color1] and [ColorDisabled] values, 35 , 35 and 35 , designate the color of the face of
the button when it is at rest, being touched or is disabled. They’re set by default to be the same colors,
but can be changed to give a visual indication of the button’s state.
The [ CommonBkColor] value, 35 , designates the common background color. This is also set by
default to match the button’s face.
The [ Fontw] value,
2
, specifies the font to be used with the theme. The font MUST be defined
BEFORE defining the theme using the FontW command.
For more details on widget themes, see the command list in Appendix B . Further information can be
found by opening the buttons.ezm macro in a text editor.
23