30
CAUTION:
Keep small children away from heater.
System Check
Prior to every cold start we would like you to do the
following:
1. Test the power coming into the unit to ensure you
have 120/220V (What ever voltage required).
2. Check all wiring to ensure that they are in good
shape and nothing has been unplugged or
damaged.
3. Check the water level, if a hydronic unit, to make
sure there is water in it.
4. Make sure all air holes (combustion blower tube
flue baffle, stack) are unclogged and free from
debris.
5. Check the pump to make sure it is working properly
and water is flowing through all of the pipes.
6. Power the controller to ensure the power light
(while LED) has turned on
7. Make sure the frequency drives screen change
from inhibit (ih) to ready (rd).
8. Check the probes to make sure the thermistors are
properly located in the thermowells and the
thermocouples are located into the furnace.
9. Inspect the furnace and make sure everything is
set according to Earth Outdoor manual.
10. Make sure the door seal provides air-tight seal
when shut.
If you notice any problems or anything unusual please
contact your dealer or distributor at any step.
Loading of Fuel
Follow manufacturer’s instructions written to achieve the
Summary of Contents for Klear Sky 400
