affect combustion.
5. The fire put out and
power is off automatically.
The hopper is empty.
No fuel feed.
The fuel feed is too little.
High temperature switch
(93˚C) is wrong.
Put fuel into the hopper.
refer to (2)
Increase the fuel feed.
Cool the stove at least 1 hour then operate
again or change the high temperature
switch (93˚C).
6. The blower still works
after the stove is cool and
fuel feed stops.
The low temperature
switch (50˚C) is broken.
Change this switch.
7.no enough heat wind
Unqualified fuel
Blower speed is too high.
Heat exchange tubes are
dirty.
Use the standard specially pellet.
Turn down the blower.
Clean the heat exchange tubes.
8. Ash and smoke fly out.
Leak between the
connection of convection
motor and venting pipe.
The clean method is
wrong.
Use silicon rubber to seal.
Clean the dust in the stove with brush to
ash drawer.
Attention: the stove has a self-checked system, operation: press “on” don’t release, then
start the power button. The stove is coming to the self-checked state, use select button
choose every parts can work normally or not.
Warranty
1.
If the owner follows the operation of this manual, it is guaranteed the stove can well work normally
within one year after selling. If the stove be destroyed by the poor quantity or the stove works
abnormally within the guarantee period, it will be repaired or changed parts with free charge.
2. The problems caused by the owner’s improperly operation are not our guarantee. We can supply payment service. It’s a
lifetime product.
Page 15 / 16
