background image

© 2007 Earlex Ltd.                                                                                                                                      L0482 03/07

8

MAINS CONNECTION

This unit is a Class II appliance which means it is double insulated for your protection, no earthing wire is
necessary.
If the supply cord is damaged, it must be replaced by Earlex Ltd or our appointed agents.
Your unit has been supplied with a mains lead with a fitted plug. This is identified by the fuse holder in the base
of the plug. Please read the following safety instructions before use.

1

. If the fitted plug is cut off from the mains lead then the plug must be disposed of safely. 

NEVER

under any

circumstances insert such a plug into a 13 amp socket.

2. NEVER

under any circumstances use the appliance or mains lead without the fuse cover fitted.

This is the little cover fixed into the base of the plug to hold the fuse in place.

3. 

If you lose the fuse cover then please contact any electrical dealer for a replacement or ring our helpline.

4

. A replacement fuse must be rated at 5 amp. These must be manufactured and approved to BS 1362.

5. IF IN ANY DOUBT CONTACT AN ELECTRICIAN.

If you need to fit a plug to the mains lead, this should be fitted in accordance with the wiring instructions below,
and will need to be used with a 5 amp fuse. If in doubt consult an electrician.
If you are using an extension lead it must be rated at a minimum of 6 amps and fully unwound. Do not operate
with a lead rated at less than 6 amps as this will cause premature failure of the motor which is not covered by
the guarantee.

As the colours of the wires in the mains lead of the application may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which
is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which
is marked with the letter L or coloured red.

Earlex Limited,

Opus Park, Moorfield Road, Guildford, Surrey, GU1 1SZ, UK

Tel:

+44 (0) 1483 454666.  

Fax:

+44 (0) 1483 454548

www.earlex.co.uk

EC Declaration of Conformity

We declare that the unit: HV1900 Conforms to LVD 73/23/EEC, EN60335-1, EMC 89/336/EEC, 

EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, EMF EN50366.

Tim Hopper  Technical Director

Copyright & Design Right Reserved © 2007

GUARANTEE

This product is guaranteed for a period of 24 months against faulty manufacture and materials. It is not

guaranteed for industrial or hire purposes. The guarantee does not affect your statutory rights. In the event

of any problem occurring please contact us on our Helpline No between 8.30 a.m. and 6.00 p.m. Mondays

to  Fridays (excluding Bank Holidays) or visit our Website on www.earlex.co.uk

HELPLINE No  01483 – 454666

INFORMATION ON THE DISPOSAL OF WASTE ELECTRICAL EQUIPMENT KNOWN AS WEEE

Your attention is brought to new directives applicable to the disposal of this electrical equipment,
where in accordance with the legislation this product must not be disposed of in your normal
household waste. Instead it is your responsibility to dispose of this type of waste by handing it
over to special designated collection points for recovery and recycling. This product is marked
with a ‘Wheelie bin’ symbol with a cross on it to remind you of this action. The objective of this
directive is to help conserve resources and ensure that it is recycled in a manner that protects
human health and the environment. For more information about where you can drop off your
waste please contact your local authority, take back facilities are free of charge.

MIN SIZE 5mm WIDE X 7mm HIGH 

EARLEX LTD. WILL ACCEPT NO RESPONSIBILITY FOR THE USE OF THIS PRODUCT IF USED FOR

ANY OTHER PURPOSES THAN THOSE DETAILED HEREIN

L0482 01-07.qxd  25/7/08  10:36 am  Page 8

Summary of Contents for SPRAY STATION









Reviews: