background image

2

SAFETY OPERATING INSTRUCTIONS

PLEASE READ BEFORE USE

l

NEVER under any circumstances aim the nozzle at another person or animal.

In the event of injury occurring seek expert medical advice immediately.

l

The spray gun must only be used with paints and  solvents that have a 

suitable flash point for  spraying. If in doubt consult paint or solvent 

manufacturer’s data.

l

Always ensure there is adequate ventilation when spraying.

l

NEVER spray near a naked flame, including appliance pilot flame.

l

NEVER smoke whilst spraying.

l

NEVER allow children to operate or play with the spray gun.

l

Always read the paint manufacturer’s thinning instructions before using.

l

Always disconnect unit from mains supply when refilling the paint container.

l

Before cleaning, always disconnect unit from the mains supply.

l

Always wear the correct protective face mask when spraying. We would also

recommend the use of gloves, goggles and overalls.

l

After every use ensure that you clean your spray gun thoroughly and grease

the gland packing.

l   

This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction 

concerning  use of the appliance by a person responsible for their safety.

l

Use only genuine manufacturer replacement parts.

l

Earlex recommend the use of appropriate ear protection when using this 

product.

l

Sound pressure level: 85dB(A)

WARNING: The substances used with this spray gun (paint, thinners etc) may
contain hazardous, harmful, explosive or corrosive materials. 
ALWAYS COMPLY WITH THE SAFETY INSTRUCTIONS ISSUED WITH THIS
PRODUCT AND THE MATERIAL BEING USED.

Only use the unit as detailed in these instructions.

L0482 01-07.qxd  25/7/08  10:36 am  Page 2

Summary of Contents for SPRAY STATION









Reviews: