background image

8

GUARANTEE

This product is guaranteed for a period of 24 months against faulty manufacture and materials. It is not

guaranteed for industrial or hire purposes. The guarantee does not affect your statutory rights. Earlex Ltd.
will accept no responsibility for the use of this product if used for any purposes other than detailed herein.

© Earlex Ltd. 2004

L0199 09/04

Earlex Ltd., Earlex House, Moorfield Road, Slyfield Industrial Estate, Guildford, Surrey, GU1 1RU.

EC Declaration of Conformity

We declare that the unit: HV5000 conforms to: 73/23/EEC, 

EN60335-1 & 89/336/EEC, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3.

Tim Hopper  Technical Director

British Registered Design No: 2, 106, 529

German Registered Design No: 402 04 314.6

French Registered Design No: 02 3314

Benelux Registered Design No: 794 76 - 01

US Registered Design No: 29/161, 395

Chinese Registered Design No: 232 9477.9

UK (Gun only) Registered Design No: 3006933

Copyright & Design Right Reserved ©

PLEASE NOTE:

We have done all we can to ensure that used correctly and according to these instructions,

this spray gun will give long and trouble free life. We accept no responsibility for damage caused by the use
of incorrect or unsuitable substances, paints or fluids which have not been thinned correctly or are unsuitable
for the surfaces to which they are applied, health hazards arising from lack of ventilation when working in
confined spaces or failure of the equipment due to inadequate cleaning of the components after use. If in
doubt, always test a small inconspicuous area first. Always read the paint manufacturer’s instructions first.
Neither our guarantee nor the above statement affects your statutory rights.

If you require further assistance, please contact our helpline on 

Tel:

01483 454666 

Fax:

01483 454548

email:

[email protected] Monday - Friday 8.30 - 18.00 (excluding bank holidays)

Website:

www.earlex.co.uk

L0199 09-04.qxd  14/2/05  10:13 am  Page 8

Summary of Contents for SPRAY STATION PRO HV 5000









Reviews: