background image

Thank you for purchasing the SprayStation Gemini

®

. We hope you enjoy the benefits this versatile paint spraying system provides. Due to the benefits

of low overspray, ease of spraying a wide variety of materials it can be used on multiple interior or exterior projects, arts and craft and hobby projects

and provide a great quality finish for even the most inexperienced painter. 

Your SprayStation Gemini

®

has been tested prior to leaving the factory. For the first use we recommend you place a quart of warm water in the

SprayStation Gemini

®

bucket turn on the pump and then the turbine and spray onto some scrap cardboard - this will clear any dust that may have

entered the paint tubes and help the paint flow through the SprayStation Gemini

®

head. If the unit does not function see our troubleshooting section,

call our customer service number (593) 22530912 ext.12. Alternatively visit our website at www.earlex.com or www.pintulac.com.ec. DO NOT PUT

PAINT INTO THE UNIT if the unit does not function in the event you have to return the product due to a malfunction then the store will not take the

SprayStation Gemini

®

back. In the event there is a malfunction and paint has been used please call our helpline and we will rectify the problem for you.

In addition we have provided a HOW TO DVD with this product which covers many of the subjects contained in this manual and we highly

recommend you watch this before setting   up your SprayStation Gemini

®

and spraying. 

Large Projects:

Direct from the paint can or Gemini Bucket.

Water-based coatings only may

be used with this set-up.

Small Projects:

From the Paint Pot.

Water & solvent-based coatings may be

used with this set-up.

A complete HVLP (High Volume Low Pressure)

& Pump Technology - painting & finishing system

3

Summary of Contents for GEMINI



















Reviews: