background image

6

SAFETy INSTRUCTIONS

WARNING! FIRE AND EXPLOSION HAZARD

DO NOT USE SOLVENTS IN THE GEMINI BUCKET OR WHEN SPRAyING DIRECT FROM THE

CAN

Selecting Paint

This SprayStation Gemini

®

is a double-insulated appliance and, as such, does not require three-way grounding. This product is equipped with a polarized

alternating current line plug (a plug having one blade wider than the other) and does not require a grounding adapter. This plug will fit into a power socket-

outlet only one way. If you are unable to insert the plug fully into the socket-outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified

electrician for further details. Do not defeat the safety purpose of the polarized plug.

Double-Insulated Appliance

Your SprayStation Gemini

®

can be used with a wide variety of paints, stains and coatings. See below what paints you can or cannot spray.

However, some materials cannot be sprayed so please check the recommendation of the paint manufacturer before buying the paint. If a material refers

to brush application only then it usually cannot be sprayed.

Extension Cords

Your SprayStation Gemini

®

is supplied with a power cord that is 6 feet long. Make sure your power cord is in good condition. When using an extension

cord, be sure to use one heavy enough to carry the current your product will utilize. For lengths up to 50 feet, 18 AWG extension cords or larger, e.g. 16

AWG, 14 AWG should be used.

Electrical Information

•  

CAUTION! TO REDUCE THE RISK OF 

   ELECTRIC SHOCK OR INJURy, DO NOT 

   EXPOSE TO RAIN; STORE INDOORS.

•  The materials used with this spray gun (paint, 

   

thinners, etc) may contain hazardous, harmful, 

   explosive or corrosive materials. ALWAYS    

   COMPLY WITH THE SAFETY INSTRUCTIONS

   ISSUED WITH THIS PRODUCT AND THE 

   MATERIAL BEING USED.

•  The spray gun must be used only with paints 

   

and solvents that have a suitable flash point for

   spraying. If in doubt, consult the paint or solvent 

   

manufacturer's data.

•  Always ensure there is adequate ventilation 

   when spraying.

•  NEVER spray near an open flame, including an

   appliance pilot flame.

•  NEVER smoke whilst spraying.

•  Always disconnect the unit from the electrical

   outlet when cleaning the spray unit.

•  Always ensure the spray area is safe and free 

   from all debris that may present a fire or fall 

   hazard.

•  NEVER, under any circumstances, point the 

   spray gun at another person or animal. In the 

   event of an injury, seek immediate medical

attention.

•  NEVER allow unauthorized users to operate or

   play with the Spray equipment.

•  Always read the paint manufacturer's thinning 

   instructions before use.

•  Always wear the correct protective face mask 

   when spraying. We also recommend wearing 

   ear protection, gloves, goggles and overalls.

•  You must clean the spray gun thoroughly after 

   

each use.

•  Use only genuine manufacturer replacement 

   parts.

•  Use the spray equipment only as detailed in 

   these instructions.

•  Do not use the air hose or power cord to move 

   the SprayStation Gemini

®

.

•  If the supply cord is damaged, it must be 

   replaced by the manufacturer, its service agent

   or similarly qualified persons in order to avoid a

   hazard.

•  Check the hoses, hose connectors and power 

   cord frequently. Any worn or damaged parts 

   should be replaced immediately.

•  This SprayStation Gemini

® 

is recommended for

   household use only.

•  This appliance can be used by children aged 

   from 8 years and above and persons with 

   reduced physical, sensory or mental capabilities

   or lack of experience and knowledge if they have

   been given supervision or instruction concerning

   use of the appliance in a safe way and 

   understand the hazards involved. Children shall

   not play with the appliance.  Cleaning and user

   maintenance shall not be made by children 

   without supervision.

•  

NEVER DISPOSE OF PAINTS OR SOLVENTS

   DOWN THE DRAIN. ALWAyS USE yOUR 

   LOCAL WASTE COLLECTION SITE.

Summary of Contents for GEMINI



















Reviews: