User manual
E&P HYDRAULICS
1.2 Specific features of the Remote control
(continued)
EXPLANATION: LEDS
(1)
SLOPE IS TO
In this position the caravan cannot be levelled,
STEEP
as the ground on which it is standing is too uneven.
Switch over if necessary to manual control.
(2)
INSUFFICIENT
The battery has insufficient power.
VOLTAGE
Or the voltage is inadequate to carry out the
procedure safely.
(3)
WITHDRAW
The caravan is too high at the front end, the front
FRONT WHEEL
wheel must be withdrawn. The LED will go out.
(4)
SUPPORT NOT
One or more of the supports extended has not
WITHDRAWN
been completely withdrawn.
(9)
MANUAL
Adjusting the caravan to a level position can be
OPERATION
carried out manually.
(15)
BATTERY 9V -
Battery power remote control is low.
POWER
(14)
LEVEL
This indicates that the caravan is now positioned
horizontally.
EXPLANATION: BUTTONS
(5)
ON / OFF
Switching the system on and off.
(6)
MANUAL
Switching the system in manual mode,
OPERATION
levelling the caravan manually.
(7)
AUTOMATIC
Switching the system in automatic mode,
OPERATION
levelling the caravan goes automatically.
(8)
WITHDRAW
Withdraw all supports automatically.
ALL SUPPORTS
(10)
LEFT SIDE
Controls extension of the left-hand-side supports
.
(11)
REAR END
Controls extension of the rear end supports
.
(12)
FRONT END
Controls extension of the front end supports
.
(13)
RIGHT SIDE
Controls extension of the right-hand-side supports
.
4.
INDICATOR LEDS
BUTTONS
