User manual
E&P HYDRAULICS
Copyright © 2013, E&P Hydraulics
This manual is copyrighted, with all rights reserved. Under the copyright laws, this may not, in
whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic medium or machine readable from without prior written consent of E&P Hydraulics.
Limited Warranty
Under all circumstances this manual should be read thoroughly, before installing and/or using
the product. In no event shall E&P Hydraulics be liable for any direct, indirect, special
consequential or incidental damages arising out of the use or inability to use this
documentation or product, even if advised of the possibility of such damages.
In particular, E&P Hydraulics shall not be liable for any hardware, software, or data that is
stored or used with this product, including the cost of repairing, replacing or recovering the
above. E&P Hydraulics reserves the right to change parts of the device at any time without
preceding or direct announcement to the client.
E&P Hydraulics reserves the right to revise the manual(s), and to make changes in the
contents without obligation to notify any person or entity of the revision or change.
A registration number appears on the product. Make sure that this official registration number
has not been removed. It should be used whenever servicing by E&P Hydraulics or an
authorized E&P Hydraulics dealer is necessary.
Important
This equipment has been tested and found to comply with the limits valid for this device,
pursuant to EN300220, EN301489, EN60950 rules conform 868MHZ. These limits are
designed to provide reasonable protection against harmful interference when this product is
operated in a commercial environment. Any unauthorized changes or modifications to this
device could void the user’s authority to operate this equipment.
For CE-countries:
This device is in conformity with the CE standards. Please note that this device can ONLY be
used with the official E&P Hydraulics level system parts to conform to these standards.
EPRC-02
– ams - september 2013
