background image

Copyright 2015 by E&G Corporation, LLC.

Visit us online today at www.egclassics.com

E&G Warranty Information:

E&G Corporation, LLC. warrants its parts and products to be free from defects in ma te ri al, workmanship or finish for Thirty-Six (36) months
from the date of shipment by E&G.  This warranty is limited to the repair or replacement, at E&G’s option, of the defective part or product.  Full
E&G warranty information is available online @ www.egclassics.com.  Just click on the product warranty icon.

For E&G Product Returns:

Please contact the authorized E&G Dealer where you purchased our product from in regards to any workmanship or warranty claims. All
items returned to E&G must have a return authorization number issued by us for inspection or a defective product and or warranty issue.
All merchandise sent back to E&G without proper paperwork or authorization will be rejected and returned.

30

.

Reinstall the radiator support panel cover and remove all protective

      masking tape to finish the installation.

30

29

.

Install the supplied #8 x 1/2” black truss head screws through the 

      holes drilled in the previous step to secure the top of the mesh 
      grille.

29

Summary of Contents for 1045-019U-15B








Reviews: