Copyright 2015 by E&G Corporation, LLC.
Visit us online today at www.egclassics.com
11
.
Use an 8mm socket to remove the hex screws retaining the lower
sides of the grille to the vehicle.
13
.
Place the factory grille onto a clean work area and apply protective
masking tape to the factory emblem to protect the finish.
11
12
.
Remove the plastic push fasteners that attach the rubber sections
to the sides of the grille. Once the rubber sections are free, lift the
grille straight up to remove it from the vehicle.
12
14
.
Turn the grille face down and remove the factory 10mm lock nuts
retaining the air flow shutters from the sides of the grille. The lock
nuts may come off, or the studs will un-thread from the clips in the
grille base.
14
15
.
Use a 10mm deep socket to remove the speed nuts across the bot-
tom of the air flow shutters.
15
16
.
Remove the factory push fasteners across the top of the grille.
16
13
