background image

IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE !

Copyright © 2015 by E&G Corporation, LLC. All right reserved.  The reproduction or uti li za tion of this work in any form or any elec tron ic, me chan i cal, or other means, no known or here af ter in vent ed, 

including xe rog ra phy, pho to copy ing, and re cord ing, and in any in for ma tion storage retrieval system is for bid den with out written per mis sion of owners.

Notes to the Technician/Installer:

E&G is proud to present this package to you and reminds you that for technical in for ma tion, contact technical assis-

tance at 410-381-4900. Do not at tempt the in stal la tion of any E&G prod uct without first reading the detailed in struc -

tions. 

E&G will not war rant dam aged parts or the ve hi cle due to altered in stal la tion procedures.

04/15/2016

1

Open the hood and remove the plastic push fasteners securing 

    the radiator support panel cover and remove the cover.

Copyright 2015 by E&G Corporation, LLC.

Visit us online today at www.egclassics.com

2015-16 Ford F-150 Billet Grilles

TOOLS REQUIRED 

Automotive grade masking tape, plastic clip removal tool, 10mm deep, 10mm, 9mm, 8mm & 7mm sockets and
ratchet, large flat blade screwdriver, #2 phillips screwdriver, flat or semi-gloss black paint, glass cleaner and soft,
clean cloths. 

Upper  Replacement 

2

.

Use a 10mm socket and ratchet to remove the upper hex screws

    securing the top of the factory grille to the support.

3

.

 Pull the top of the flexible rubber air deflector off the top sides of

    the factory grille.

3

2

1

4

Disconnect the electrical connector at the air flow shutter motor.

    

Disconnect the air temperature sensor electrical connector at the top

    of the factory grille.

4

Upper Black Billet Part #1045-019U-15B

Upper Polished Billet Part #1045-019U-15

Important: Fits F-150 models with air flow shutters only.  If the factory grille on the vehicle you are

working does not have air flow shutters, please call technical support at 410-381-4900 before 

proceeding.  

Will not work with vehicles equipped with 360-Degree camera system.

Summary of Contents for 1045-019U-15B








Reviews: