eamlab Studio300, User Manual, Page: 5 / 12

5
Unpacking :
Carefully remove from the box your Amplifier
and keep the original carton and packing
materials for future trips, expeditions or long-
term storage.
Introduction :
first of all thank you for choosing our a power
amplifier. Amplifier built on modern and
reliable high construction standards and with
high-quality components of the latest
generation. Every model of HA is tested
according to strict functional testing to ensure
high reliability in all conditions and provide
high performance sound unchanging for long
periods of time. The 5 year warranty on every
component that constitutes the amplifer is
further
proof of its reliability.
The high power available allows you to enjoy
your music in full harmony without ever
listening fatigue and dynamic compressions.
Precautions :
For the high power can be supplied to ensure
that the speakers connected to it are able to
withstand these powers worth the irreparable
damage to speakers connected.
Before the installation :
remove your amplifier, taking care to keep it
in the future if you ever require to be shipped
to a service center EAMLAB to be overhauled
or repaired
.
Installation :
thanks to its ease of use, there are no
particular notes of difficult interpretation.
Before making any connections, make sure
that the amplifier is turned OFF, preferably
with the mains plug is disconnected to avoid
unwanted random ignitions. Connect to the
output terminals of the speaker cable of at
least 2.5 sq mm cross section being
particularly careful to observe the correct
polarity to avoid unpleasant steps against
acoustic ranging to compromising the overall
noise. The section of the power cable that
feeds the wall outlet where the amplifier must
be connected to at least have a diameter of
2.5 mmq. For model HA600 and
at least
1.6mmq. for HA300. This is to ensure the
amplifier always the right energy reserve
when it is subjected to high dynamic musical
passages.
It should be best to treat this aspect of the
electrical installation if you intend to use
the
most of our amplifiers.
Preparation