4
Art. No. 10018
SNEPP ALU ROOF RACK
Assembly instructions
•
Lockable, with 2 locks
•
suitable for nearly all vehicles with an open roof railing
•
Load-bearing capacity 60 kg
•
Up to 125 cm distance between the railings on the car
•
Bar lengths 1260 mm
•
TÜV-/GS-teste
Figures:
1. Open the closing caps with the key.
2. Withdraw the assembly key from the end of the rack.
3. Unscrew the setting screws and place the roof rack symmetrically onto the railings.
4. Adjust the distance between the two roof rack parts (approx. 700 mm).
Use the setting screw to pull the rack on the railing and tighten the screws on the attachment
clip. Then tighten the setting screws. Check the roof rack is tightly in place by pulling forwards
and backwards.
If necessary, tighten the attachment clamps.
Then replace the end caps and close.
right
wrong
wrong
