Please carefully read and follow the safety and operating instructions. Not following these instructions
may result in a serious accident, including damaged property or serious injuries or even loss of life.
IMPORTANT SAFETY INSTRUCTIONS
If you are not confident working with your car´s 12V DC voltage or are unsure of what you are doing, do not
attempt to jump-start your car. Consider to seek for help by a professional breakdown service (roadside towing
service) or your vehicle´s manufacturer.
Read your car´s owner's manual!
Some vehicle manufacturers have special requirements before jumpstarting the vehicle (e.g. fuses that have to
be removed or certain security demands). Some vehicles manufacturers place the battery in the cargo area or
trunk. These vehicles often have designated jump-start terminals
This System is intended to be used only on vehicles with a 12 Volt DC automotive battery.
NEVER CONNECT to 6V, 24V or other batteries. Do not use the jump starter for other things
than the intended usage. Not following these instructions could cause serious personal
injury or material damage.
Never touch or connect the red to the black clamps - This can cause dangerous sparks,
electric arcing or explosions.
Use in dry environment only. Keep the unit dry and clean. Do not use the unit close to open fire. Do not
operate the unit in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Please stop charging or using the device and power-off the device, if the unit is getting hot, is smoking or
leaks any liquid.
MAINTENANCE
Do not open the body casing. There are no user-serviceable parts inside.
Damage due to improper use,
modifications or attempted repairs lead to the exclusion of liability and the loss of warranty.
ATTENTION:
After each failed attempt to jumpstart your car, take a break for at least 1 minute to avoid
overheating.
Summary of Contents for 16558
Page 20: ......
