eagletone.com
Electronic keyboard Eagletone MPW37
User’s manual
5
GettinG prepareD
taking care of your instrument
1. Do not place or store the instrument in
extremely damp, hot or dusty places.
2. Avoid placing heavy objects on the
instrument or exposing it to physical
shocks.
3. Do not use any chemical agents to clean
its surface such as benzene or thinners.
power supply
This instrument can be powered with
batteries or with an DC adaptor (none of
these are included). Follow the instructions
below.
Batteries
Firstly, insert 6 C-size alkaline batteries
(SUM-2 or R-14) in the battery holder.
1. Open the battery holder located under the
instrument.
2. Insert the batteries and make sure you
respect the polarity indicated on the
instrument.
3. Replace the battery cover and make sure
it is closed correctly.
Warning:
• Do not use old and new batteries together.
• Always use batteries of the same type.
• Always remember to remove the batteries
when the instrument is not to be used for
an extended period of time.
DC aDaptor
Use an DC adaptor whenever you want to
use domestic electrical power. The DC
adaptor must have a DC 9V, 500mA output,
with a positive central pin. Make sure the
instrument is turned off before connecting
the DC adaptor to the wall outlet and its
supply cord to the instrument. This will
automatically bypass the batteries.
important:
1. When used, the DC adaptor can generate
heat. This is normal.
2. Please disconnect the DC adaptor from
the wall outlet when the instrument is not
in use.
3. Never use a type of power supply that
does not correspond to the one specified
for the instrument.
Connections
ConneCting heaDphones
Headphones can be plugged into the
PHONES/OUTPUT connector on the rear of
the instrument.
The internal speaker is automatically
disconnected when headphones are plugged
into that jack output.
ConneCting an amplifier
Plug an audio cable into the PHONES/
OUTPUT connector, and then plug the other
end of the cable into the LINE IN or AUX IN
connector of the amplifier.
