background image

9

Use 

 

 

 

 to highlight a prefix, then press 

ENT

 to turn it on (check)

or turn it off (uncheck).

NOTE:

The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:

 

GLL transmits latitude and longitude of present position, time of
position fix, and status.

 

GGA transmits time, position and fix related data.

 

APB transmits autopilot information.

 

RMC and RMB transmits navigation information messages.

 

GSA and GSV transmits fix mode, DOP values and satellites in
view information.

 

DBT transmits the depth below the transducer.

 

DPT transmits the depth

 

MTW transmits the water temperature.

4. When the desired prefixes are checked or unchecked, press 

EXIT

repeatedly to return to the main page display.

Compatibility with Various VHF Radios

The Digital Selective Calling (DSC) feature in marine radios is
relatively new technology. The U.S. Coast Guard implemented its first
DSC-capable systems in Atlantic City, N.J. and Chincoteague, VA in
September, 2003. The entire U.S. DSC rescue system will not be
operational until Sept. 30, 2006.

As more marine electronics manufacturers enter this growing market, other
connectivity issues with your unit may appear. You can check for known
compatibility issues by visiting our web site, 

www.eaglesonar.com

. Look

in the Manuals section for updated documents for your sonar/GPS unit.

Summary of Contents for CUDA 250 S/Map













Reviews: