background image

1

To reduce the risk of serious injury, read the following safety instructions thoroughly 
before assembling and using the gazebo. 

 Check with your local governing authority/local municipal codes regarding installation and permitting 

of such structures before assembly.

  Use of personal protective equipment including gloves, safety glasses, and closed toe footwear is 

recommended during assembly. 

 Requires two or more people to assemble and install safely and correctly. 

 The product is required to be installed on level solid surface and is not intended for unsecured use. The 

gazebo is to be anchored to the surface with appropriate bolts or anchors. These anchors need to be 
purchased separately for the specific installation surface. Do not assemble the gazebo on soil, earth, or 
bare ground. 

 Ensure enough clearance around the product. Before assembling the product, find level ground no less 

than 6' (1.8 m) away from any structures or obstructions, such as fences, buildings, or overhead 
obstacles.

 Do not assemble or install the gazebo underneath electrical lines or above underground utilities. 

 Check for underground utilities before digging or driving stakes into the ground. 

 This gazebo is not to be regarded as part of a building/house structure. 

 All assembly and maintenance of the product must be carried out by adults only. 

 Use all power tools and hand tools in accordance with their respective safety manuals. 

 Keep children and pets away while setting up the gazebo. 

 Do not hang heavy weights from the roof frame.

 Do not climb onto the roof of the gazebo for any reason. 

 Check all nuts and bolts monthly to ensure bolts/nuts are tightened. 

 Check the metal hardware monthly to ensure there are no exposed sharp edges or rust. Sand sharp 

edges or rust with sandpaper and apply touch up paint. Always use lead free paint that conforms to 16 
CRF Part 1303. 

WARNING:

Needed for assembly: 

(The following tools are not included)

Pistol Drill

Tape Measure

Hammer  Screwdriver  

Ladder 

Level

Framing Square

Two or more people

Summary of Contents for HTDH120-BLK

































Reviews: