STEAM CONTROL
STEAM CONTROL
Dear Guest,
Thank you very much for purchasing our sanitary ware. To
enable you to use this product safely and effectively, please
read this installation and operation manual carefully before
use.
1.
protection device, the power plug contains earth line, and make sure
it is reliable earth line. Check the protect system of leakage
protection each time before use.
2.Do not turn on water pump, heat pump or air bubble pump without
water.
3.Before turn on water pump, check if the water level over jets 10 to
20 mm or not, make sure regular usage of water pump otherwise it
will be destroy because of water leakage.
4.People with Hypertension symptom, after drink or heart disease are
not allowed to use the bathtub. Children have a bath must under
adult's guidance.
5.During use please noticed that don't blocked the jets and avoiding
the air adjustment valve overflowing. Also keep the bathtub clean
and don't let it blocked by hair or mess.
6.During use, please firstly adjust the water temperature or it will be
burned.
7.The bathtub is designed with ergonomic, rise and fall changes are
quite big so during usage pay more attention of be slipped.
8.Please shut down the system when not to use.
Please ensure that the product installed reliable electric leakage
CAUTIONS: Heat pump and air bubble pump is optional purchase.
CAUTIONS
TECHNIQUE PARAMETER
60H
Z
0. 1~0 .2M pa
2. 65K W
1K W
0. 2K W
1. 0H P
Vol tage
Freque ncy
Water
Volatge
Power of
steam
generator
Power of
water pump
Power of
heat pump
Power of
air pump
Ac
1
10
V(
±
10%)
Storage
capacity
40g al lon
Storage
capacity
3
0. 18m
Step 1
Step 2
Step 3
Self-clean system
Pour into cleaning
liquid from here
Step 4
Cleaning method
：
1.Clean the steam engine regularly at least once by every 2weeks
or after using 20 times.
2.Inject citric acid as main cleaning liquid,add 1.5L each
time.after 10 minutes, turn on and When the system turns on,
press
“
”
button to start the steam function for about 30seconds
and then shut down the system.After vent the stagnant
water,repeat 2 or 3 times.
3.CAUTION: The system must be shut down before injecting
01
WS
-609
P
14
WS
-609
P
