EAE EE-6603S, Installation, Operation, And Parts Manual

Page: 13 / 39

Installation, Operation and Parts Manual
EE-6603S/EE-6603B
13
4.1.4 Tools and equipment for installation
Tool name Specification Quantity
Electrical drill With D16 and D18 drill bit. 1
Open spanner D17-19mm 2
Adjustable spanner bigger than D30mm 1
Cross socket screw driver PH2 1
Quick spanner handle adapter/ Ratchet 1
Socket spanner D24mm 1
Levelling device 1
Hammer 10 pounds 1
Truck lift Capacity more than 2500 kg 1
Lifting strap Capacity, 1000 kg 2
Lifting strap Capacity, 2000 kg 1
4.1.5 Checking parts
Unfold the package and check if any parts missed as per the following list. Do not hesitate to contact us in case any parts missed, but if
you do not contact us and insist installing upon the lack of some parts, we as well as our dealers will not bear any responsibility for this
and will charge for any parts subsequently demanded by the buyer.
No. Name Specification Qty
1 Power side lifting platform assembly 6603B-01 1
2 Secondary lifting platform assembly 6603B-02 1
3 Control cabinet 6603BM 1
4 Expansion bolt M16*120 16
5 Air hose D=8 2m
6 Air hose connector PP-20 5*8 1
7 User's Manual 1
8 Key 1
9 Oil tank label 1
4.2 Installation attentions
4.2.1 Joints of oil hose and wiring must be firmly connected in order to avoid leakage of oil hose and looseness of electrical wires.
4.2.2 All bolts should be firmly screwed up.
4.2.3 Do not place any vehicle on the lift in the case of trial running.
4.3 General installation steps
Step 1: Dismantle the package and place lifting platforms into recessed pits with a forklift and lifting straps.
Raise the platform by using a forklift and 2 lifting straps until the mechanical lock is engaged. Dismantle the bolts that fix the platform
and its wooden package and then hoist the platform onto the expected installation site.
Attention 1: Avoid scratching the painting surface and hoses.