EAE EE-6435V2.S, Installation, Operation, And Parts Manual

Page: 23 / 51

Installation, Operation and Parts Manual
EE-6435V2.S/EE-6435V2.B
23
4.4. Items to be checked after installation
S/N Check items YES NO
1 Screw torque of expansion bolts : 60-80N•m;
2 Rising speed ≥20mm/s;
3 Noise with rated load ≤75db;
4 Grounding resistance: not bigger than 4Ω;
5 Height difference of the two platform ≤5mm;
6 Mechanical locks are robust and synchronized when running with rated load ;
7 If the control button works as “hold to run”?
8 If limit switches work well?
9 If grounding wire is connected?
10 If the lift rises and lowers smoothly?
11 If there is no abnormal noise during running with rated load?
12 If there is no oil leakage when running with rated load?
13 If expansion bolts, nuts or circlips are well secured?
14 If max lifting height is 1830mm?
15 If Safety advices, name plate and logos are clear?
OPERATION INSTRUCTIONS
5.1 Precautions
5.1.1 Check all the joints of oil hose. Only when there is no leakage, the lift can start work.
5.1.2 The lift, if its safety device malfunctions, shall not be used.
5.1.3 The machine shall not lift or lower an automobile if its center of gravity is not positioned midway of the rising platforms. Otherwise, the
manufacturer as well as the dealers will not bear any responsibility for any consequence resulted thereby.
5.1.4 Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
5.1.5 When platforms rise to the expected height, turn off the power to prevent any wrong operation done by unconcerned people. If
necessary, lock the switch with a padlock.
5.1.6 Make sure the safety lock of the lift is engaged before start working under the vehicle and no people under the vehicle during lifting and
lowering process.