Installation, Operation and Parts Manual
EE-6435BWF
19
2. Push the power side post to the direction of the crossbeam and insert the ratchet down through the inner surface of the end plates of
the crossbeam. (Take special care not to damage the limit switch NO.13 in the following fig.)
Step 6: Route and fix steel ropes.
Please see Annex 1 for steel cable routing.
Inspect and make the rope be in the slot of the two pulleys (NO.15 and NO.16 in the following fig.)
Pull the rope (NO.14) up through the hole reserved on top of the post and fix it with screws.
(Attention: Fix with two M20 nuts (NO.17) and oneφ20 flat washer (NO.18) above the top plate.
Fix with one M20 nut and one φ20 flat washer under the top plate.)
12. Safety ratchet
13. Limit switch (for safe descent )
14.steel rope
15.pulley A
16.small pulley
17.M20 nut
18.φ20 flat washer
Summary of Contents for EE-6435BWF
