EAE 48015 Product Manual Download Page 23

Page: 23 / 24

PRODUCT MANUAL IPR100

EAE KNX IP ROUTER

IPR100 R1

EAE Technology

www.eaetechnology.com

Page 23 / 24

7.6. Sub Line

Picture 8: Sub Line

NOTE:

If the parameter “Send confirmation on own telegrams” is set yes, IPR100 will send an ACK

systematically when sending any own routed telegram.

ETS-Text

Range

[Default value]

Comment

Configuration

groups: filter, physical: block

groups, physical: filter

groups: route, physical: filter

groups, physical: route

configure

[groups, physical: filter]

- Block: no telegram is routed.

- Filter: Only telegrams are routed which
are entered in the filter table.

- Route: the telegrams are routed.

- Configure: the following parameters can
be set individually.

This parameter is to be set depending on
the planed configuration.

Group telegrams

1. transmit all (for testing
only)

2. block

3. filter

[filter]

1. All group telegrams are transmitted.

2. No group telegram is transmitted.

3. Only group telegrams are routed which
are entered in the filter table. The ETS 3/4
produces the filter table automatically.

Summary of Contents for 48015

























Search results

Summary of Contents for 48015

Reviews:

Related manuals for 48015

Brands by name

Popular brands

EAE 48015, Product Manual

Search results

Summary of Contents for 48015

Reviews:

Related manuals for 48015

Brands by name

Popular brands