PRODUCT MANUAL IPR100
EAE KNX IP ROUTER
IPR100 R1
©
EAE Technology
www.eaetechnology.com
Page 15 / 24
6. Application Description
If the coupler receives telegrams (for example during commissioning) which use a physical address as
destination address, it compares the physical addresses of the receiver with its own physical address
and then decides whether it must route the telegrams or not.
The coupler reacts to telegrams with group addresses in accordance with its parameter settings. During
normal operation (default setting), the coupler only routes those telegrams whose group addresses
have been entered in its filter table.
If the coupler routes a telegram and does not receive an acknowledgement, or if a bus device finds a
transmission
error, the coupler repeats the telegram three times. With the parameters „Repetitions if
errors...“, this
behavior can be set separately for both lines. These parameters should be left in the
default setting.
