Eades Appliance Technology SousVide Supreme, Operating Instructions Manual

Page: 7 / 108

7
Set the timer
Touch Timer . You will hear one tone. The display Clock will illuminate and blink.
Touch Plus or Minus
and hold to reach the desired timer setting. You will hear one tone, and the display will
show time scrolling in one-minute increments.
Once you have scrolled to the desired timer setting, touch Start . You will hear an ascending three-tone alert. Timer
Running will illuminate in the display. (Note: If the temperature was not set previously, you will hear three tones, and
the display will revert to the set-temperature function.)
When the time setting has elapsed, you will hear a five-tone alert, and Timer Running will blink. The five-tone alert
will sound again in 10 minutes. Timer Running will continue to blink until the Timer is reset or the machine is turned off.
Check the timer setting during operation
Touch Timer . You will hear one tone. The display Clock willl illuminate and blink, the display will show the time
remaining for 10 seconds, and then revert to the water temperature.
Change the timer setting during operation
Touch Timer . You will hear one tone. The display Clock will illuminate and blink, and the display will show the time
remaining for 10 seconds, during which time it can be reset.
Touch Plus or Minus and scroll to the desired timer setting. The display will show the setting increase or decrease
in one-minute increments.
Once you have scrolled to the desired timer setting, touch Start . Start must be selected within 10 seconds of selecting
Timer, or the new time will not be set.
Reset the timer after it elapses
Touch Timer . You will hear one tone. The display Clock willl illuminate and blink, and the display will show the time
remaining for 10 seconds, during which time it can be reset.
Touch Plus or Minus and scroll to the desired timer setting. You will hear one tone, and the display will show time
scrolling in one-minute increments.
Once you have scrolled to the desired timer setting, touch Start . Start must be selected within 10 seconds of selecting
Timer, or the new time will not be set.