background image

!

Press to enter 
headless mode 

Press one-key return

Return 

One-key Return 

Out of control return

Headless Mode

-12-

Before using the headless mode, the drone should rise 5 

meters from the ground. 

Pressing the headless mode button to activate the headless 

mode, Then the rear indicator light of the drone will flash 

quickly and the remote control beeps , headless mode on. 

Pressing the headless mode button again to exit.

Return 
The drone has a return function. if the starting point is successfully recorded before take off, 

When the signal between the remote control and the drone is lost or the return button is pressed, the drone will automatically 

return to the starting point and land to prevent accidents. 

The drone has three different return modes:

1. One-key return (the drone will automatically return to the starting point by pressed the One-key return button) 

2. Out of control return (the drone will automatically return to the starting point, when it beyond the remote control range or 

loses connection) 

3. Low power return. (The drone will automatically return to the starting point, when drone is in low power) 

Starting point: 

During the take-off or flight, when the GPS signal strength is more than 7 stars for the first time, the current position of the 

drone will be recorded as the starting point.

When the GPS signal strength is more than 7 stars, 

the drone can be returned by pressing the one-key 

return button of the remote control. The one-key 

return process is the same as the out of control 
return, but the user can control the drone through 

the joystick to avoid obstacles, when the drone 

returns near to the landing. Press the one key return 

button again, you can exit automatic flight and the 

user can regain control. 

When the GPS signal strength is more than 7 stars and the compass works fine, after the drone successfully records the 

starting point, if the remote control signal is lost for more than 6 seconds, the flight control system will take over control of the 

drone and control the drone to fly back to the starting point. If the remote control signal is restored during the flight, the return 

flight process will continue, but the user can exit the flight control system and regain control of the drone by press one-key 

return button of the remote control.

Precautions: 

● The drone cannot dodge obstacles during the automatic return flight. 

● When the GPS signal is not good or the GPS function is not working, it cannot be returned. 

● If the drone does not receive the GPS signal and the remote control signal is lost more than 6 seconds, the drone will 

not be able to return to the starting point, and it will slowly descend, land and lock.

● The rear indicator light of the drone flashes slowly. At this time, the remote control continuously emits “beep beep beep..” 

As long as the drone is fly higher than 20 meters or the distance is farther than 20 meters, the drone will automatically 

perform the return function. Fly back to the starting point. 
● When the voltage of drone below the safe value, the drone will automatically fall to the starting point. 

Low Power Return

Summary of Contents for EX5















Reviews: