Pre-Flight Inspection
Flight
Mode 1: The throttle joystick on the right side, Mode 2: the throttle joystick on the left side.
Accelerometer calibrate means the Gyro calibration.
Magnetometer calibrate means the Compass Calibration.
Attention, when you activate the waypoint function and orbit mode, the drone will automatically ascend to the default height,
please do not set the altitude too much.
Warning: The factory has already set the parameters, it is generally not recommended that you modify it by
yourself.
Basic Flight Step
1. Synchronize the remote control and the drone, then the drone will automatically finish initializing.
2. Perform the Gyro Calibration procedure.
3. Download the APP and pair the drone with the mobile phone by Wifi.
4. Performing the Compass Calibration procedure. Waiting for the drone automatically search satellite signals, usually 60-80
seconds (check the main interface of app, signals should be more than 7 stars ), until the rear light of the drone is steady on,
signals receiving finish.
5. Unlock the drone, then push up the throttle stick of the remote control, the drone takes off, could use the APP to controls
the drone.
1. Ensure the battery of remote control and drone are fully charged.
2. Ensure the blades installed correctly
3. Ensure the motor works fine.
4. Make sure the compass calibration is successful.
5. Make sure the GPS signal is more than 7 stars.
-10-
Setting
Summary of Contents for EX5
Page 1: ......
