EA3GCY EGV-9B v1, Assembly Manual

Page: 23 / 35

EGV-9B
80 to 10m QRP CW Transceiver Kit Page 23
 IC14
ATMEGA328P module (Arduino NANO compatible)
Install the two 15-pin female strips on EGV-3B board to ATMEGA328P or Arduino NANO module as
shown in the image.
To assemble the ATMEGA328P module follow the following order:
- Solder the 28-pin IC socket. You must make sure to place it in the correct direction according to the
silhouette printed on the board.
- Solder the two 15-pin male strips. Make sure that they are vertical.
- Insert the ATMEGA328P chip into the socket. Make sure that you are heading in the right direction.
- Insert the module on EGV+v2 board its
correct position (see pictures).